What should I have ready when the truck arrives?

Have the drop spot clear of vehicles, trailers and low branches, with a firm approach the truck can reach. The load is tipped in one pile, so pick a spot where a pile will not block a door, a walkway or a drain. Loose pets and children should be inside while the truck is on site.

What is the best base under pavers in Aurora?

Crushed rock is the standard base material here, and it is what the state base course gradation table describes. On loess ground, crushed rock spreads the load over silt that goes soft when saturated, which is the failure mode to avoid. Bed the pavers on screenings over that base and fill the joints with the same fines.

How is the material measured?

You can order by the ton or by the cubic yard, whichever suits how you plan the job. If you tell us the area you are covering and the depth you want, we will work the quantity out with you rather than leaving you to guess.

3/8 Inch Limestone Chips for Pathways in Aurora, NE

Nebraska Rock Supply handles gravel and aggregate delivery in Aurora, NE for contractors, farms and homeowners. Some buyers need crushed rock for a new drive, and others want a few yards of chips for a garden path.

The ground here sits on the Loess Plains and the Rainwater Basin, so what you put down has to handle silt and standing water as well as traffic.

Ground and Conditions in Aurora

Across the Loess Plains and the Rainwater Basin, the surface is a flat to gently rolling loess plain over silty clay loam. There is no rock anywhere near the surface.

That matters because a base course laid thin over silt will pump and rut once the ground is saturated, and the closed playa basins on this plain have no outlet, so water ponds instead of running away.

The practical answer is a base that spreads the load and a surface that drains. Sheet and rill erosion on open silt is common here, and dry windy springs move bare soil, so covering ground with aggregate rather than leaving it raw helps on both counts.

Base, drive and paver work runs from the spring thaw into late autumn. The wettest ground comes in late spring, and the driest working conditions arrive in late summer.

Frost heave lifts gravel drives and yards through the spring thaw, and the frost depth the city or county building department publishes is commonly 42 to 48 inches. That figure is a footing depth set by the jurisdiction, so check with Hamilton County before you pour.

Materials for Aurora Projects

Fines and screenings do the fine work here, and they are worth planning for before you order anything structural. Stone screenings, which yards also call limestone screenings or chips, bed pavers and flagstone, fill joints, and top a compacted base to a smooth finish.

A path built with a fines surface walks clean and holds its shape.

For a path that needs a finer, walkable surface than a drive, walkway gravel is the material to look at.

Where the path is decorative rather than load bearing, Natural Pea Gravel is a rounded option for walkways and play areas, and river rock, the rounded stone Nebraska yards call Platte River rock, suits borders and dry creek beds.

Under all of that, crushed rock is the standard Nebraska base material for driveway and parking base, shed and slab bases, and the compacted layer beneath pavers. The state base course gradation table uses the same term.

Crusher run, also called crush and run or 3/4 inch minus, is the graded mix with fines that binds and compacts tight for a drive or pad.

Drainage and surfacing round out the list. Road gravel, which road departments call surface gravel, goes on top of a drive or farm lane.

For French drains, foundation drainage and downspout runs, 1 inch clean rock and drain rock are the open options, and 3/4 inch crushed limestone works for drainage beds and behind retaining walls. Riprap armors culvert outlets, pond edges and cut slopes against runoff.

Sand and soil carry the planting and masonry side. Platte River sand, also called concrete sand, is washed sand for concrete work and for bedding under slabs and pavers, and mason sand suits brick, block and paver joints.

Topsoil, sold here as black dirt, handles lawns and bed preparation, and fill dirt builds up low ground before a base course goes on.

Delivery to Aurora and the Surrounding Area

You order online and choose a quantity by the ton or by the yard. If you are not sure which unit fits your project, each product page has a calculator, and that is the place to size the load before checkout.

Pick a delivery date at checkout and a dump truck tips the material on site.

Aurora sits in Hamilton County, and delivery covers the surrounding area, including Giltner, Hampton, Phillips, Marquette and Hordville. Have the spot clear and reachable so the truck can tip its load without obstruction.

Order Gravel and Aggregate for Your Aurora Project

Start with the calculator on the product page to size your load in tons or yards, then pick your delivery date at checkout. Nebraska Rock Supply delivers crushed rock, screenings, drainage stone, sand and soil across Aurora and Hamilton County.

Place your order online and we will bring the material to your site.

Bulk Gravel Delivery to Aurora, NE